Unprinted Clear Shrink Sleeve on Rolls

Clear PETG Shrink Tubing

Clear PETG shrink tubing is our clear PETG shrink film seamed into a continuous tube and wound flat onto rolls. It is supplied unprinted, as a plain clear shrink sleeve material.

Because the tube is already closed, it can go straight onto a sleeving or banding line. You cut it to length, place it over the product, and shrink it.

We supply it in lay-flat widths from 20 to 500 mm, in 30–60 μm film (single wall), on 500 m or 1000 m rolls.

Common uses include multi-cell battery packs (for example, four cells bundled together), yarn, cosmetics, and outer wrapping for many other small consumer goods.

Clear PETG Shrink Tubing

What are the technical specifications of Clear PETG Shrink Tubing?

Property Test Method Unit Result
Lay-flat Width – mm 20 – 500
Film Thickness (single wall) – μm 30 – 60
Roll Length – m 500 or 1000
Thickness Tolerance ASTM D 374 μm ± 1.0
Density ASTM D 1505 g/cm³ 1.32 ± 0.02
Tensile Strength @ MD ASTM D 882 MPa ≥ 40
Tensile Strength @ TD ASTM D 882 MPa ≥ 200
Elongation at Break @ MD ASTM D 882 % ≥ 250
Elongation at Break @ TD ASTM D 882 % ≥ 30
Heat Shrinkage @ MD ASTM D 1204
95°C 10s
% ≤ 3.0
Heat Shrinkage @ TD ASTM D 1204
95°C 10s
% ≥ 75
Friction Coefficient @ Static ASTM D 1894 μs ≤ 0.60
Friction Coefficient @ Dynamic ASTM D 1894 μk ≤ 0.55
Haze ASTM D 1003 % ≤ 7.0
Transmittance ASTM D 1746 % ≥ 90
Gloss (45°) ASTM D 2457 % ≥ 110
Surface Tension ASTM D 2578 mN/m ≥ 38

Our supply range: lay-flat width 20–500 mm, single-wall film thickness 30–60 μm, 500 m or 1000 m per roll. Material properties are those of the clear PETG shrink film the tubing is made from. Available with a perforated tear line on request.

Shrinkage Curve (Temperature vs. Shrinkage %)

OPTIMAL · 95-100°C 80% 60% 40% 20% 0% 55 60 70 80 90 100 TEMPERATURE (°C) SHRINKAGE (%) TD · Transverse MD · Machine

Curve shows the typical behavior of the clear PETG shrink film used for this tubing, in a 10-second water bath (ASTM D 1204).

Actual shrinkage depends on film thickness, exposure time, and tunnel conditions. Request a batch-specific test report for production planning.

What is Clear PETG Shrink Tubing used for?

Clear PETG shrink tubing is used where a product needs a clear, tight outer wrap and no printed label. Typical jobs are bundling multi-cell batteries into retail packs, wrapping skeins and balls of yarn, sleeving cosmetic jars, tubes and gift sets, and covering many other small consumer goods so they stay together and stay clean on the shelf.

Why buy Clear PETG Shrink Tubing from JFPolyFilm?

A premium shrink film supplier is judged on three things: production scale, batch consistency, and global trade reliability. Here's how we deliver on all three.

01

In-House Bruckner Production

Three state-of-the-art Bruckner production lines deliver 18,000+ tons annually, with consistent quality and the scale to fulfill large recurring orders without sub-contracting.

Equipment by Bruckner Maschinenbau · Germany
02

Quality Assured per Batch

Every production batch is tested for shrinkage rate, thickness uniformity, and optical properties before shipment. A Certificate of Analysis (COA) ships with each order, with full lot traceability.

Certified: GRS · REACH · RoHS
03

Global Trade Experience

Exporting to 30+ countries across Americas, Europe, Southeast Asia and the Middle East. We handle international shipping, customs documentation, and Incoterms end-to-end.

20+ years operating

Frequently Asked Questions

How do I choose the lay-flat width for a clear shrink sleeve?
Lay-flat width is half the tube's circumference. It has to be wide enough for the tube to slide over the widest part of the product, and the film's shrink has to be enough to pull it tight around the narrowest part you want covered. Send us the product dimensions and we will suggest a width within our 20–500 mm range.
What roll lengths are available, and how is each roll identified?
500 m or 1000 m per roll. Each roll carries a label on its side identifying batch number, length, width, and production date, and each batch ships with a Certificate of Analysis (COA).
Can I get a sample before ordering?
Yes. Send us the lay-flat width you need and we will arrange a tubing sample. Customer covers shipping costs.
What shrink temperature does the tubing need?
The same as our clear PETG shrink film. Best results come at 95–100°C. A boiling water bath (90–100°C), a hot air tunnel (95–110°C surface, film actual ~95°C) or a steam shrink tunnel (90–100°C) all work. A heat gun is fine for trying small batches.
Is this the same as heat shrink tubing for wires and battery cells?
No. Electrical heat shrink tubing is an insulating sleeve, usually polyolefin, PVC or PET, sold for wires and individual cells. Our tubing is clear PETG packaging film in tube form, used to wrap and bundle finished products.
Can I order tubing together with shrink film in one shipment?
Yes. One order can combine different films, including this tubing. Tell us what you need of each and we will quote them together.

Need a Quote for Clear PETG Shrink Tubing?

Tell us your specifications and we'll respond within 24 hours.

Request a Quote