Plastic Packaging Tax and Shrink Film: The 30% Rule
How plastic packaging taxes in the UK, Spain, Italy and the EU treat shrink sleeves, why the 30% recycled-content threshold is the number worth remembering, and how RPET film helps a sleeve cross it.
A shrink sleeve is a plastic packaging component, and in a growing number of European markets that means it carries a tax bill by weight — unless the film holds enough recycled content to cross a threshold. The single most useful number for a sleeve buyer to carry is 30%: the recycled-content line the UK draws between a taxed sleeve and an exempt one.
It is also worth saying plainly at the top: tax rates move, and this is not tax advice.
A bottle line selling into the UK or Spanish market can begin by qualifying RPET shrink film against the recycled-content figure its specification needs.
Why the sleeve is taxed as a component in its own right
The sleeve is taxed because it is a plastic packaging component in its own right, assessed on its own weight rather than as part of the bottle it decorates.
A brand can run recycled-content bottles and still owe tax on a virgin sleeve, or the reverse.
The four European taxes a sleeve can meet
| Tax (in force) | How it charges | Recycled-content treatment | What it means for a sleeve |
|---|---|---|---|
| UK Plastic Packaging Tax (since 2022) | Per tonne on packaging below the recycled threshold | Hard line: ≥30% recycled by weight is exempt; below 30% is taxed | A sleeve under 30% recycled adds a per-tonne charge; at or above, the component is exempt |
| Spain, tax on non-reusable plastic packaging (since 2023) | Per kilogram on non-recycled plastic, no threshold | Every certified recycled kilogram is deducted from the taxable weight | Each recycled kilogram in the film lowers the taxable weight of the sleeve layer; fully recycled is exempt |
| Italy plastic tax (legislated, not in force) | Planned per-kg charge on single-use plastic items | Recycled and bio-based plastics planned for exemption | No charge applies today; the plan has been deferred repeatedly, currently to 2027 |
| EU plastic own resource (since 2021) | Per kilogram on non-recycled packaging waste, paid by member states | Recycled packaging waste is excluded from the member-state base | No direct charge on the sleeve; it is the reason national sleeve taxes exist |
Why 30% is the number to design around
Of everything above, the 30% UK threshold is the figure worth committing to a spec, because it is both stable and executable in a way the rates are not. The 30% line has held since the tax started, and it converts cleanly into a design target: get the recycled content of the sleeve film at or above 30% by weight and that component drops out of the charge entirely.
How recycled content changes the tax treatment
Push that percentage to 30% or above and the sleeve component clears the UK threshold; feed it into the Spanish calculation and every recycled kilogram comes off the taxable weight.
A standard RPET grade typically carries 30–50% PCR, which lands it above the UK 30% line by design and puts a substantial deduction into the Spanish base.
Proving the recycled content counts
A recycled percentage earns its tax treatment only when it is documented, because it cannot be measured on the finished film.
The distinction between holding a certification and proving a shipment is where recycled claims most often come apart at audit, and it is worth setting out in full when qualifying a supplier — the mechanics of scope versus transaction certificates are covered in the guide to verifying shrink film certifications.
Frequently Asked Questions
Does the UK Plastic Packaging Tax apply to shrink sleeves?
What recycled content exempts a sleeve from the UK tax?
Does recycled content help in Spain the same way it does in the UK?
Related Articles
How Is PETG Shrink Film Made? Where Roll Quality Is Decided
How PETG shrink film is made, and which production stage sets each line buyers check on arrival: gauge tolerance, TD/MD shrink, haze, tensile strength, roll labels.
Shrink Film Roll Length Calculation: The 3-Inch Core Trap
Formulas linking roll diameter, length and weight, worked metric and imperial examples, a 30–60 μm diameter table, and why core size and trapped air shift the result.
Need Expert Advice on Shrink Film?
Our technical team can help you choose the right film for your application.
Contact Us